12V/24V 10-30A Amp Solar Panel Charger Controller Dual USB Battery LCD Regulator

Description

12V/24V 10-30A Amp Solar Panel Charger Controller Dual USB Battery LCD Regulator
Features:
Adopt industrial-grade main control chip.
Large-screen LCD display; display of charging and discharging current,
query of accumulated power generation and discharge, temperature display,
light control + delay control, adjustable charging and discharging parameters,
with functions such as power-off memory.
Dual USB output, maximum current up to 2.5A, support for iPhone charging.
Complete 3-stage charging management
Built-in over-current, short-circuit protection, open-circuit protection, reverse connection protection,
all of which are self-healing and do not damage the controller.
Anti-backflow circuit, ultra-low heat generation
Specification:
100% brand new with high quality
Material: ABS + PC
System voltage: 12V24V automatic adaptation
Rated charging current: 10A/20A/30A (optional)
Maximum photovoltaic voltage: 23V for 12V battery; 46V for 24V battery
Boost charging voltage: 14.4V
Floating voltage: 13.7V (default value, adjustable)
Discharge cut-off voltage: 10.7V (default value, adjustable)
Discharge recovery voltage: 126V (default value, adjustable)
Charging recovery voltage: 13V
Light-controlled turn-on threshold Photovoltaic panel: 8V (light-controlled turn-on has a delay)
USB output: 2 USB outputs, 5V/2.5A (maximum)
Standby current:<10mA
Working temperature: -35 - +60℃
Size: 125x112x34mm/4.92x4.41x1.34in
Package Included:
1 x Solar Controller
Note:
This controller automatically recognizes 12V24V.
When installing for the first time, please make sure that the battery has enough voltage
so that the controller can recognize the correct battery type.
Install the controller as close to the battery as possible to avoid voltage drop caused by
excessively long wires and affect normal voltage judgment.
This controller is only suitable for all kinds of lead-acid batteries (including openings, seals, gels, etc.).
This controller can only use photovoltaic panels as the charging source.
Do not use DC or other power sources as the charging source.
The controller will heat up when it is running, please pay attention to install the controller on a flat,
well-ventilated surface.
The colors may be a little difference for the different monitor display.
Please check as much as possible to make sure the item is the one that you need.
Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
If you  have any question,Please feel free to contact us
On Jul-20-21 at 23:21:12 PDT, seller added the following information: