DIY Universal Solar panel mount, mounts on wood post or steel post.

Description

This angle mount is for the DIY'er primary using galvanized electrical struts and1 5/8 & 2 3/8 galvanized fence pipe and many other Aluminum extrusions.
This Aluminum solar panel mount comes in two sizes 4X4X3/8-thick or 5X5X3/8-thick.
The ETDH-4X4X3/8 mount has one 1 5/8 hole pattern for your horizontal pipe which supports your panels and a 2 3/8 hole pattern for galvanized post to ground. The mount is for light weight use.
The ETDH-5X5X3/8 Aluminum solar panel mount has two hole patterns, one for 1 5/8 & one for 2 3/8 horizontal pipe for supporting your panels, whichever you decide to use. The mount is for heavy duty use to handle multiple panels.
Order specifications as follows:
1.1-4x4x3/8 wood/steel Angle mount & 2-1 5/8 coated saddle clamps for horizontal panel mounting pipe. 2-2 3/8 zinc plated saddle clamps for mounting to your 2 3/8 galvanized ground post.
2.1-5x5x3/8 wood/steel post Angle mount & 2-2 1/4 zinc plated saddle clamps. This kit has a hole pattern for either 1 5/8 or 2 1/4 horizontal pipe configuration. This typically would be for wood post because the kit has only 2-21/4 saddle clamps for mounting your 2inch-2 3/8 horizontal pipe for your panels.
3.1-5x5x3/8 wood/steel post angle mount & 4-2 1/4 zinc plated saddle clamps. This aluminum angle mount has a hole pattern for both 1 5/8 and 2 1/4 pipe configuration.
Only the 5x5x3/8 mount has a punch hole pattern for both 1 5/8 or 2 3/8 galvanized steel pipe to mount your panels. This mount can also be mounted on either wood post (4x4, 4x6, 8x8, etc) or 2 3/8 galvanized fence post which is readily available at your nearest hardware store. We recommend schedule 40 pipe (thicker than what most hardware stores carry, but the same size OD), if you plan on mounting 300-400 watt panels.
Just two of our heavy duty L-Brackets were used in this large panel build (2-335watt panels).
This mount can be used in multiple configurations (as seen in photos).