GunSkins Gear Skin 8" x 50" Camo Wrap DIY Vinyl Kit

Description

Gear Skins are Do It Yourself Vinyl Wraps for Any Gun or Accessory
Cover and protect your gun with a GunSkins Gear Skin! Our generic template allows you to install on any firearm or accessory. Simply clean the surface, peel and press, add heat to conform, and trim away any excess material. GunSkins offers top of line camouflage and specialty patterns to choose from, fit for any application.
GunSkins Gear Skin is a single sheet measuring 8" x 50". There is enough material to wrap any gun! We recommend using a Gear Skin when we don't offer a precut template for a specific make or model. Consider using a Scope Skin (8" x 15") to wrap smaller items.
Gear Skin Kit Template with Single 8" x 50" Sheet
GunSkins Gear Skins will fit any firearm or weapon accessory
. The DIY vinyl wrap kit is generic and requires the user to trim to fit their specific model. The kit comes with in single 8” x 50" sheet of material. They are waterproof and have a non-reflective matte finish. Gear Skins conform to any shape and are easy to install. They can be also be used to wrap a variety of firearms and accessories, including:
- AR-10s
- Airsoft Guns
- Paintball Guns
- Assault Rifles
- Bows
- Crossbows
- Masks
Gear Skins are available in a variety of tactical, hunting, and specialty camouflage patterns.
Frequently Asked Questions
Why won't the vinyl stick to the surface of my gun?
You must thoroughly clean the gun before installing the wrap. Use a gun-specific degreaser and a small brush, scrubing all recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.
Can the wrap be removed?
Gear Skins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.
Is it waterproof?
​The high-performance vinyl is non-porous, which means that the material creates an air-tight seal that also prevents water from getting in or out. As a matter of fact, GunSkins are completely waterproof.
Will heat from the barrel melt the vinyl?
The heat from the barrel will not affect the material. However, we do not recommend wrapping the barrel if you fire using full auto or use a suppressor.
Step by Step Installation Instructions
Clean the Surface.
Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Rubbing alcohol is a good last step to remove moisture, but alone is not strong enough to cut through gun oil.
A clean gun makes for a clean install.
Peel and Stick.
Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers.
​If need to, peel off and reposition until you are satisfied with the placement.
Heat and Trim.
Use a heat gun or blow dryer to get the vinyl to conform to the shape of the gun. Take your time and work away wrinkles and air bubbles.
​Use a sharp hobby knife to trim away excess material. Overlap the extra and press firmly to set. Heat again to finish.