GunSkins Vinyl Decals for Pistol Mag Base Plates 6-Pack [Magazine Not Included]

Description

GunSkins Mag Skins are Do It Yourself Vinyl Decals for 9mm or .40 Cal Double Stack Magazines
Cover, protect, and identify your magazines with GunSkins Pistol Mag Skins! Our precut templates make installation quick and easy. Simply clean the surface, peel and press, add heat to conform, and trim away any excess material. GunSkins offers top of line camouflage and specialty patterns to choose from, fit for any application.
GunSkins Pistol Mag Skins are designed to fit any 9mm or .40 double stack magazines. The kit includes pieces for 6 mag base plates and a bonus piece for the slide cover plate if applicable.
Pistol Mag Skin Kit Template with Precut Pieces
GunSkins Pistol Mag Skins will fit any most brands including airsoft.
The next time you're burning through a dozen mags at the range, worry no more about your pistol mags mysteriously disappearing. GunSkins Pistol Mag Skins are non-permanent vinyl decals that enable you to customize and identify six of your mag base plates in less than a minute.
Designed for 9mm and .40 caliber double stack magazines. GunSkins are 100% waterproof, non-reflective, and made in the USA. Organize and identify your rounds by caliber, capacity, and more with GunSkins!
Frequently Asked Questions
Why won't the vinyl stick to the surface of my mag?
You must thoroughly clean the mag before installing the wrap. Use a gun-specific degreaser and a small brush, scrubing all recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.
Can the wrap be removed?
GunSkins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.
Is it waterproof?
​
The high-performance vinyl is non-porous, which means that the material creates an air-tight seal that also prevents water from getting in or out. As a matter of fact, GunSkins are completely waterproof.
How durable are GunSkins?
GunSkins are made from a high-performance vinyl. The material is 6/10 mm in thickness and will add an extra layer of protection to the surface of your mag.
Step by Step Installation Instructions
Clean the Surface.
Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Rubbing alcohol is a good last step to remove moisture, but alone is not strong enough to cut through gun oil.
A clean mag makes for a clean install.
Peel and Stick.
Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers.
​If need to, peel off and reposition until you are satisfied with the placement.
Heat and Trim.
Use a heat gun or blow dryer to get the vinyl to conform to the shape of the mag. Take your time and work away wrinkles and air bubbles.
​Use a sharp hobby knife to trim away excess material. Overlap the extra and press firmly to set. Heat again to finish.