-40%
RigExpert AA-30 antenna analyzer
$ 92.4
- Description
- Size Guide
Description
RigExpert AA-30 antenna analyzerSerial number 4437
This is a used piece of equipment
.
Ships via USPS Priority mail
International sales welcomed and ship through the eBay Global Shipping Center.
Shipping times will vary if going out of the country. Specified delivery times listed on the ad is to US addresses and will also vary. The eBay Global shipping center is included in that and not the final destination outside of the US.
The information listed below is from the manufacturers website and does not reflect what is included in the sale. It is for reference use:
RigExpert AA-30
RigExpert AA-30 and AA-54 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).
Easy-to use measurement modes, as well as additional features such as connection to a personal computer (to plot Smith charts, etc.), make RigExpert AA-30 and AA-54 attractive for professionals and hobbyists. It is quite important that graphical display of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required to adjust an antenna.
The following tasks are easily accomplished by using RigExpert AA-30 and AA-54:
Rapid check-out of an antenna
Tuning an antenna to resonance
Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
Making coaxial lines or measuring their parameters
Cable testing and fault location
Measuring capacitance or inductance of reactive loads
Specifications
Frequency range:
AA-30: 0.1 to 30 MHz, AA-54: 0.1 to 54 MHz
Frequency entry:
1 kHz resolution
SWR measurement range:
1 to 10
SWR measurement for 50 and 75-Ohm systems
SWR display:
numerical or easily-readable bar
R and X range: 0…1000, -1000…1000 in numerical mode, 0…200, -200…200 in graph mode
Display modes:
– SWR at single or multiple (AA-54 only) frequencies
– SWR, R, X, Z, L, C at single frequency
– SWR graph, 100 points
– R, X graph, 100 points
RF output:
– Connector type: UHF (SO-239)
– Output signal shape: square, 0.1…10 MHz (AA-30) or 0.1…10.8 MHz (AA-54). For higher frequencies, third or fifth (AA-54) harmonics are used.
– Output power: about +13 dBm (at 50 Ohm load)
Power:
– Two 1.5V, alkaline batteries, type AA
– Two 1.2V, 1800…2700 mA·h, Ni-MH batteries, type AA *
– Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
– When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface:
– 128×64 graphical backlit LCD
– 6×3 keys on the water-proof keypad
– AA-54: multilingual menus and help screens, AA-30:menus and help screens in English language
– USB connection to a personal computer
Dimensions:
22·10·3.6 cm (9·4·1.5”);
Operating temperature:
0…40 °C (32…104 °F)
Weight (including batteries):
400g (14 Oz)
Warranty:
2 years
RigExpert AA-30 and AA-54 are made in Ukraine.
GTIN-13: AA-30: 4820185420020, AA-54: 4820185420013
Specifications are subject to change without notice.