Uni-Solar PVL-128 UL LISTED 128W 24V Flexible Solar Panel Grid-Tie Solder Points

Description

Uni-Solar PVL-128 UL LISTED 128W 24V Flexible Solar Panel Grid-Tie Solder Points
Uni-Solar PVL-128 128W 24-Volt Flexible Amorphous Solar Panel with Bottom Facing SOLDER POINTS. These are top tier finished panels. Unisolar made them this way for a specific client. These are also Grid Tie UL 1703 Listed for Systems up to 600 VDC. Which means they were made to last 20 Years. See brochure
Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with manufacturer's guidelines.
These panels are New Open Box. They have the bottom solder points for connections down through the roof. They are 18 feet long. If you would like the cables that you add to come up through the top of the panel it is possible by scraping off the top sheet above the solder points and connecting the wire through from the top. Then caulk the bottom solder points to insulate. We include a DIY Junction Box with 18-Inch long MC3 Connectors FREE with every panel sold. You can just remove and use the wires or if you solder a short 4" wire into solder point you can then glue the J-box to add cables.
Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent.
Electrical Stats:
Maximum Power (Pmax): 128 Watts
Nominal Operating Voltage: 24 Volts
Max Power Voltage (Vmpp): 33 Volts
Max Power Current (Impp): 3.88 Amps
Open Circuit Voltage (Voc): 47.6 Volts
Short Circuit Current (Isc): 4.8 Amps
Physical Stats:
Panel Dimensions (Feet): 18 long x 1.29 wide
Panel Dimensions (Inches): 216 long x 15.5 wide x 0.2 thick
Panel Weight: 16 Pounds
Electrical Connectors:
None: Solder Points on bottom of panel
Features:
Lightweight & Flexible
Easy Peel & Stick Application
Virtually Unbreakable (No Glass)
Shadow & High Heat Tolerant
Frame Material: Frameless
Bonding adhesive factory-installed on the back of the laminate
Condition:
Open box
New Open Box. This panel has bottom-facing solder points for connections down through a roof. We include a DIY Junction Box with 18-Inch MC3 Connectors with every panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. It is 18 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.
CLICK BELOW FOR MORE SOLAR OPTIONS
Shipping
Best Offers
Returns
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA.  Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you.  All items are shipped from our warehouse in Ventura, CA USA.
​​​​​​​
We have
IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an
OFFER
on this item and you do not see a
MAKE OFFER
button, please use the
CONTACT SELLER
link at top right under our username. ​​​​​​​
30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Satisfaction
Guaranteed
Fast Shipping
Customer Support
Click here to see description
Uni-Solar PVL-128 UL LISTED 128W 24V Flexible Solar Panel Grid-Tie Solder Points
Uni-Solar PVL-128 128W 24-Volt Flexible Amorphous Solar Panel with Bottom Facing SOLDER POINTS. These are top tier finished panels. Unisolar made them this way for a specific client. These are also Grid Tie UL 1703 Listed for Systems up to 600 VDC. Which means they were made to last 20 Years. See brochure
Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with manufacturer's guidelines.
These panels are New Open Box. They have the bottom solder points for connections down through the roof. They are 18 feet long. If you would like the cables that you add to come up through the top of the panel it is possible by scraping off the top sheet above the solder points and connecting the wire through from the top. Then caulk the bottom solder points to insulate. We include a DIY Junction Box with 18-Inch long MC3 Connectors FREE with every panel sold. You can just remove and use the wires or if you solder a short 4" wire into solder point you can then glue the J-box to add cables.
Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent.
Electrical Stats:
Maximum Power (Pmax): 128 Watts
Nominal Operating Voltage: 24 Volts
Max Power Voltage (Vmpp): 33 Volts
Max Power Current (Impp): 3.88 Amps
Open Circuit Voltage (Voc): 47.6 Volts
Short Circuit Current (Isc): 4.8 Amps
Physical Stats:
Panel Dimensions (Feet): 18 long x 1.29 wide
Panel Dimensions (Inches): 216 long x 15.5 wide x 0.2 thick
Panel Weight: 16 Pounds
Electrical Connectors:
None: Solder Points on bottom of panel
Features:
Lightweight & Flexible
Easy Peel & Stick Application
Virtually Unbreakable (No Glass)
Shadow & High Heat Tolerant
Frame Material: Frameless
Bonding adhesive factory-installed on the back of the laminate
Condition:
Open box
New Open Box. This panel has bottom-facing solder points for connections down through a roof. We include a DIY Junction Box with 18-Inch MC3 Connectors with every panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. It is 18 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.
CLICK BELOW FOR MORE SOLAR OPTIONS
We have
IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an
OFFER
on this item and you do not see a
MAKE OFFER
button, please use the
CONTACT SELLER
link at top right under our username. ​​​​​​​
Shipping
Returns
Best Offers
30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA.  Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you.  All items are shipped from our warehouse in Ventura, CA USA.
​​​​​​​
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Customer Support
Satisfaction
Guaranteed
Fast Shipping
On Mar-01-21 at 01:35:20 PST, seller added the following information: